Jaely’s 4th Birthday Celebration

Hafa Adai Sweet Friends,

Today, I’ll be sharing with you some party decorations I made and some photos from my daughter’s 4th birthday party-q (party + bbq= party-q) lol… I know lame..;) Hope you enjoy all the photos!

Here are the My Little Pony ear headbands I made for the girl’s party favors. I used glitter foam for the ears and adhered it to the headbands with hot glue. This was definitely fun to make! I made my own template to cut the ears.

I made cupcake toppers using Cut Out and Play My Little Pony Digital Papers for the circle scallop backing. I used Reverse Confetti Circles N’ Scallops Confetti Cuts to cut out the pieces. Here is the link if you’d like to purchase the digital papers https://www.etsy.com/listing/240978820/my-little-pony-digital-paper-kids?ref=shop_home_active_2&ga_search_query=my%2Blittle%2Bpony

IMG_3530

I also used the digital paper for the birthday banner. To cut the banner I used We R Memory Keepers Banner Punch Board. Made the flag style banner.

IMG_3525

I used the left over pieces from the digital papers for the photo booth frame I made. I cut more embellishments from the glitter foam and adhered it all to my frame.

IMG_3533

That’s it for today’s post. Here are some photos from the party-q! Have a beautiful day!

Xoxo,

Lydine

Products Used:

  • Reverse Confetti: Circle N’ Scallops Confetti Cuts
  • We R Memory Keepers: Banner Punch Board
  • Cut Out and Play: My Little Pony Digital Paper

 

Reverse Confetti: February Sketch For You To Try + Slider Card

Buenas Crafty Friends,

Today I will be sharing with you yet another slider card. This card will be my first entry for Reverse Confetti Sketch For You To Try February Challenge. Here is the sketch #3333_Feb2016

For the slider card I used again different products from my favorite crafting companies. Here are some photos and a short video.


IMG_3563

IMG_3564

Steps:

  1. Cut card base 5 x 10″ and score at 5″
  2. Cut two front panel to 5 x 5″
  3. I marked where I wanted the cut circles on one of my panels and die cut using Circles N’ Scallops Confetti Cuts
  4. On one piece of the front panel I stamped the two bunnies from the Lunar Animals on the top and the two bottom circles I stamped the bunny butt (hehe..) using Bunny Hop and the stamped heart is from Honey Bunny. I also added some carrots and Easter eggs
  5. I adhere the panel with the stamped bunnies to my card base.
  6. I colored all the stamped images (excluding the heart) using my prismacolored pencils.
  7. For the slider piece I cut it to about 4 x 5.25″ and stamped the sentiments from Bunny Hop and Honey Bunny.
  8. I adhere the scallop die cuts to circles and adhere it to the card base using foam tape. It gives a bit of room for the slider piece to slider in and out.
  9. For the bunny on the upper right. My ink smeared as I made the eyes darker. I didn’t want to start all over again. So, I stamped the bunny onto a scarp white piece and colored him and then fussy cut it and adhered in on top of the previous stamped bunny. Turned out great!

That’s it for today’s post. I hope I created a card right for the challenge. Thanks for stopping by! Have a beautiful day!

Xoxo,

Lydine

Products Used:

  • Bazzill Cardstock: Apple Crush
  • Neenah Solor White 110lbs. Cardstock
  • Reverse Confetti: Circles N’ Scallops Confetti Cuts
  • Newton’s Nook: Bunny Hop
  • Mama Elephant: Lunar Animals / Honey Bunny
  • Prisma Colored Pencils
  • Inks: Versafine: Onyx Black / Hero Arts: Ombre Pink to Red

Happy Valentine’s Day + Slider Card

Buenas Everyone,

Happy Valentine’s Day to you all! May this day and everyday be filled with tons of happiness & love! Today I’ll be sharing with you another Valentine’s theme slider card. I must say this one is my favorite. I used different products from some of my favorite crafting companies to create this card.

First, I started out by cutting a front panel which measures 4.24 x 5.50″ (standard size A2) with my fiskars paper trimmer and my card base. I then used Concord & 9th Layers of Love Die to cut out the heart shape (I die cut out two). I used one the negative cut out and stamped the cute puppy from Mama a Elephant Lunar Animals Stamp Set with Antique Linen and colored him with my prisma colored pencils and the second one I used for masking. See photo below.

I used distress ink Fire Brick for the ombré look from dark on top to lightest on bottom. I adhere some double sided tape to the back of my panel to hold the negative piece (with the stamped puppy) in place and added foam tape to give some dimension for my slider piece.

I cut out my slider piece, rounded off the bottom using my We R Memory Keepers 123 Punch Board, and stamped my sentiment just in the bottom of the slider piece. For the tab to pull the slider I used one part (larger tail) of Reverse Confetti Layered Bow Die Set. At this point I already adhered my main panel to my card base and was testing the slider piece. I notice that the sentiment on the slider was showing through my front panel. At first it was fine but then it kept bugging me. I believe I slide the slider about four to six times and finally decided that I need to cover it. I didn’t want to start over so I ended up adding Yes or No to the slider piece. See photo below.

After adding the Yes No note I testing the sliding and it came out perfect! For the finishing touches I added a small heart confetti to the puppy, added some wink of Stella to the puppy and a ribbon. I hope you enjoyed this post and thanks again for stopping by! Products used will be listed below.

Thanks for stopping by! Have a beautiful day!

Xoxo,

Lydine
Products Used:

  • Concord & 9th: Layers of Love Die Set
  • Mama Elephant: Lunar Animals Stamp Set
  • Simon Says Stamp: Paper Hug
  • Inks used: Distress Ink – Fired Brick & Antique Linen
  • Wink of Stella Brush Pen Clear
  • Prismacolor Pencils: 24 Set
  • American Craft Premium Ribbon
  • Fiskars Delux Paper Trimmer
  • Cricut Cuttlebug

Valentine’s Candy Grams + Reverse Confetti Products 

Hafa Adai my friends,

Today I will be sharing with you some Valentine’s Day candy grams I made using Reverse Confetti products from their January 2016 Release. Here are some photos.


I made about twelve candy grams and it turned out lovely. I hope you enjoy the photos and I’ll list the products used below. Here are more photos.


 Thanks for stopping by and be sure to follow for more creations & inspirations!
Xoxo,

Lydine

Products used:

  • Reverse Confetti: In the Bag Confetti Cuts & Clear Tote, Lovey Word Confetti Cuts, & Layered Bow Confetti Cut
  • Avery Elle: Elle’s Alphas
  • Inks Used: Papertrey Ink- Raspberry Fizz, Hibiscus Burst, & Pure Poppy / Versamark- Imperial Purple
  • Papers/Cardstock: Neenah Solar White 80lbs., Bazzill Cardstock, & Crate Paper

Slider Card + Mama Elephant Products + Another entry for SSSW Challenge

Hafa Adai All,

I’m back with another card post. Today I will be sharing with you a slider card I did recently using Mama Elephant’s Three Amigos stamp set. I must say Mama Elephant creates such cute critters! Love all their products!


I colored these guys using my prisma colored pencils. After I colored them I cut an opening in the area where you usually stamp the cute little messages/words on. I used my craft knife to carefully cut the opening. After that was done I took my card base and places my main panel on top and did my markings so I know where to stamp the little sentiments. See photo below.


Then I added some die cut hearts on my main panel. As you can see in the photos. To add some color I used my distress ink Barn Door. I also stamped a valentine sentiment to my slider panel to add another surprise for the receipient. This slider card was first and I must say I did pretty alright for my first try. If you want to see a short video on the card slider card please head over to my instagram page https://www.instagram.com/creativetouch_gu/ and I appreciate if you follow me for more creations!

Also, I will be using this as another entry for Simon Says Wednesday Challenge! Thanks for stopping by! I promise to try and be more detailed in my future posts. Check out all the fabulous creations from all the amazing crafters or join in on the challenge! Here’s the link http://www.simonsaysstampblog.com/wednesdaychallenge/

Xoxo,

Lydine

Supplies used:

  • Mama Elephant: Three Amigos
  • Winnie & Walter: Audrey’s Cutaways (I used the heart dies)
  • Reverse Confetti: In the Bag (I used the accent for the tag die)
  • Distress Ink: Barn Door
  • Prisma Colored Pencils
  • Neenah Solar White Cardstock 110lbs
  • Papertrey Ink: Pure Poppy Dye Ink

First Blog Post & SSS Wednesday Challenge

Hafa Adai,

My name is Lydine. I’m from a little island in the Pacific Ocean called Guam. Not many people heard of Guam but for people that had the experience of traveling or vacationing on Guam loves the tropical feel of it. Please forgive me if my post is not making sense or is not that appealing. I am still new to the blog world and will be learning more from all of you!

For my first post today, I wanted to share with you some valentine’s day cards. I will be entering Simon Says Stamp Wednesday Challenge Have a Heart using Reverse Confetti products.

FullSizeRender

I made two cards using a mix of products from fabulous companies. I will list the supplies used at the bottom of this post. Here’s more of the cards up close.

I hope you enjoyed this post and will be back for more! Will be sharing more soon on my beautiful island of Guam and of course more crafting projects! Thanks again!

XOXO,

Lydine

Supplies used:

  • Reverse Confetti: Lovey Words Confetti Dies, In The Bag Dies (tags)
  • Concord & 9th: Layers of Love Dies & Sophisticated Script Stamp Set
  • Taylored Expressions: Swiss Hearts Embossing Folder